manual / faq

Manual

manual


FAQ/extended troubleshoot

Enter Main Menu

hold the fire and '+' buttons until you see the menu on the display.


TUBO seems to run cold

Increase the resistance in ‘menu>coils>manage>TCR’ by 0.002. Make sure the lock symbol is after the number before you leave. repeat if necessary.


TUBO seems to run hot

Decrease the resistance in ‘menu>coils>manage>TCR’ by 0.002. Make sure the lock symbol is after the number before you leave. repeat if necessary.


Change click combinations

Change in ‘menu>interface>clicks’. 5-click always powers on/off.


Set Up Cruise Control/Session mode

Assign “Cruise” to one of the Clicks in ‘menu>interface>clicks’.
Set your Cruise duration in ‘menu>vaping>protec’.
Activate Cruise by clicking the fire button the amount that was set in the clicks menu option. (2 clicks default)
Cruise will be deactivated automatically when the time is up or when it is aborted with a single click of the fire button.


Set Up Temperature Stepper

Activate temperature stepping by clicking the fire button the amount that was set in the clicks menu option. (4 clicks default).
The session time is equally divided into the amount of steps set in Tsteps and will steadily increase temperature for each step.
Cycle through the steps with '+' and '-'.
n ‘menu>vaping’ set your session time (timer), amount of temperature steps (Tsteps), the starting temperature (LoTemp) and the end temperature (HiTemp).
I Assign “Tstep” to one of the Clicks in ‘menu>interface>clicks’.


Set Ecolevel for Eco-Cruise Control

Theoretical energy savings by lowering heater temperature between draws in Cruise Control.
Set your Eco level in ‘menu>vaping>Ecolevel’.
0: eco features disabled, original Cruise Control. keeps the heater at the set temperature.
1: the heater temperature is lowered when no draw is detected.
2: the heater temperature is lowered more than in eco level 1 when no draw is detected.
3: the heater temperature is always lowered to 135degC when no draw is detected.


Set Up WarmUp-mode

Assign “WarmUp” to one of the Clicks in ‘menu>interface>clicks’.
Activate WarmUp by clicking the fire button the amount that was set in the clicks menu option. (3 clicks default)
The warming up automatically shuts off when the threshold watts are reached. It can be interrupted by single clicking the fire button.


WarmUp to Cruise/WarmUp to Tempstep

When 'menu>vaping>W2Cru' is set to:
0 - warmup mode terminates normally and the device waits for further input.
1 - warmup mode will continue to cruise control automatically.
2 - warmup mode will continue to temperature stepper.
 


Change peak power

Assign "Edit" to one of the clicks in 'menu>interface>clicks'. Go back to main screen and click the fire button according to the clicks menu. The top line starts to flash. Navigate to the ‘PWR’ line by clicking ‘-‘ and press ‘+’ to start changing the value and save with the fire button. Recommended value is 70watts.


Activate 1°C/5°F increments

Switch the option in 'menu>interface>1CF5' to ON.


Change 3rd line display

The third line on the main screen can be switched to display different properties, default is current (AMP).
Enter main screen edit mode by clicking the fire button according to clicks menu until top line flashes. Navigate to the third line by clicking ‘-‘ and press ‘+’ to change the display info. Set by clicking the fire button. Third line will show when in on demand operation or when the device is idling.


Specify battery type

Change battery type in ‘menu>expert>bat’. Mostly adjusts battery charge percentage. Its fine to let it at ‘30Q’ with other batteries.


Activate power mode

In ‘menu>vaping>modes’ activate power mode by setting ‘power’ to ‘Y’. enter main screen edit mode by clicking fire three times until top line flashes. Press ‘+’ until you see ‘power’ and select with the fire button. Recommended values for on-demand mode are 35-45 watts. Cruise mode is not recommended in power mode. Do the same to get back to TCR mode.


Set clock

In ‘menu>clock>set Time’ set your local time and press&hold the fire button to save.



Videos






Safety

battery safety pic



There are no products to list in this category.